When are the times going to be posted?

Have you checked the ground on the ecu?

I'll have to pass on that.
thanks anyway.

I have a map for my f5a but it's for a wolf 3d.

Where abouts in Brisbane are you? If you are close I will take it.

Just put in a digital hatch cluster and use the jaycar kit.
Works 100%

My rims are 5.5 The front required a little pull on the guards and roll the lip. The rears I cut the lip off the bump stop,(then rewelded it) then rolled the guard. I also run the single leaf spring, which i had reset 2 inches lower. The ride feels so much better the a set of springs with lowering b...

Also anything wider than 185/40/15 has to have spacers on back to clear the springs. I run 195 with 3 mm spacers. Need all the traction i can get..
Niiko

Give suzisport at springwood Qld a call they have built one.
They can let you know what needs to be done. It wasnt cheap ....
For the difference of 140 cc i dont think it is worth it.

Wasn't there a lot of work to do to get the twin cam heads on?
Something about valves hitting pistons and something about oil pick up position or journal. Been a while when i did the research on this.

at least most of you guys had some basic maps, i had no map for my wolf3d. I fouled the plugs within seconds of starting( running too rich). These days when the boy doesn't fire, i throw in a set of plugs and it fires up straight away. Brayden, which fuel filter did they recommend to put in the vacu...

Do you need awd or fwd box ?

Just remember to use the right speedo cable.
550 and 800 gearbox's have different ends.

I know it is a silly question but, have you tryed adjusting the air fuel mixture screw?

There is a car yard in briz who are going to be selling chery motors cars soon.