brayden where did you here that from???? :D :D :D depending on how much you want to pay for postage, Boss wreckers at tingalpa (east side of brisbane) have a burnt out MB with tank and filler still attached (they are expensive however, but worth a try as it's been sitting there for a few months now)...

An old member Fritz posted this up a while back when I asked a similar question.....

-One of my stocker 12" tyre/rims is 8.7kg

not sure what width tyre was on the 12" rim.......

you can remove the stem seals without removing the head.....you just need an air supply and then pressurise the cylinder through the spark plug hole so the valve doesn't drop. In saying that you are far better off taking the head off and inspecting it for damage and doing a general clean up around t...

you can just use a single rubber hose from a suzuki swift (SA model), but you will need to figure out a way of clipping it to the strut (or just replace your struts with swift SA items, which lowers the car 1") the advantage of this is if you remove the strut you don't have to bleed the brakes....

definitely driven by vandals as there was branch pieces under the front right....plus ignition barrel had been tampered with....

parts up on ebay for phil's car.....
http://shop.ebay.com.au/james19670_4/m. ... ksid=p4340

Had my eye on the dash, but prices are a bit high......

forgot to mention he's keeping the seats, exhaust and wheels.....the rest will be on ebay.

Just an update on Phils old MB that was at the Pickles auction.... http://www.pickles.com.au/damaged/vehicle/CP-02-88-Suzuki-Mighty-Boy-Utility-2-Seats-2-Doors/itemid-1-970028250/lotid-0 The person that bought it is going to chop it in half so as to keep the paint job/art and turn it into a trailer ...

how much did you end up selling this for????

Love the ghetto oil cooler!!!!!!!!!

I'm going to take the morning off work to go and watch the auction..... sad to see a very nice MB end up like this!!!!!!!

Definitely looks like the work of vandals.....pricks!!!! (makes me worry about leaving my good MB in car parks!!!!)

I have seen braided brake lines on Yahoo Japan Auctions made for the MB(SS40T), just have to wait till I get a set before I can confirm if they conform to ADR...... I would also be interested in a new radiator as long as it was 2 or more cores.... What about hand brake cables as everyone I got (4 se...

make sure the wire from the dizzy to the coil wasn't unplugged when you took the carby off.

if that's ok, take a plug off and put your finger over it while cranking, to check if you are getting compression...

$45 sounds like a second hand unit from the wreckers.....definitely not a 'new' price.

If it's the case it is from a wreckers any alternator they have will be the same price.....less hassle with pulley's etc to find a smaller one.....not sure but what is the suzuki swift one like????

pics would help of the carby as I don't recall ever seeing anything blue back there?????

To get to that back nut on the carby I got a spare 12mm spanner and cut about a 1/4 off the shaft....works great