Ichiban had 1 on ebay 1800.

Its a dual pole coil fed 12v direct when cranking and 12v ignition switched with inbuilt resistor on the other pole while running so reduced voltage

Seen a few in japan with a.c

http://www.goo-net-exchange.com/usedcars/ search migthtyboy and look every now and then they pop up.

http://www.ebay.com/itm/111530560448?it ... 23&vxp=mtr

If you wanted to look at it.

Just ordered my new kazuma mammoth 800 carby from the states $184 usd plus $34usd freight to aus

I should have one here, will have a look.

Looks awesome i have been waiting for the progress, inspired the build on mine.

Bugger the images are gone, did anyone save them?

Whoops glad i checked

Just to confirm the Weber 30dic to suit mightyboy manifold is the 10-112 also to suit datsun 1600, as this one on ebay?

http://www.ebay.com.au/itm/MISUBISHI-L2 ... 2344df29f1

My greenslip is over 500 so over 800 for me in nsw

Workshop D.I.Y Guide Electronic Ignition Using Crane Cams Xr700 fireball Ignition System Pic of the Kit http://i15.photobucket.com/albums/a353/Stevoss/Mobile%20Uploads/th_CraneFireballKit.jpg Purpose : To remove the continually wearing / needing adjustment parts and replace the Points and Condenser ...

I dont have a picture but off the carb didnt work for me i went straight off the manifold, it had a plug on the drivers side which fit a brass nipple i had lying around.

Just found this thread any pictures of the finished products yet?

I searched and this thread popped up and rather than post a new topic i thought i would add something i realised. So I know this is almost relevant to the exact topic but in looking for a vacuum source to set the idle(looking for best vacuum) i found the ports on the carby didn't have vacuum at idle...