Search found 1070 matches
- Sat May 11, 2013 5:18 pm
- Forum: General Discussion
- Topic: Central Locking Door Jam Grommet
- Replies: 10
- Views: 2221
Re: Central Locking Door Jam Grommet
Any of the automotive parts stores will be able to supply the grommets. I put most of my wiring into convoluted, split tube but door wiring can often be better in PVC tube(clear hose) like you'll find at the hardware.
- Thu May 09, 2013 8:32 pm
- Forum: General Discussion
- Topic: Free, Real Performance Boost
- Replies: 7
- Views: 4840
Re: Free, Real Performance Boost
Don't apply anything to the terminals until leads are in place & secure - the corrosion inhibitor/grease or whatever can cause resistance. Clean terminals & leads, assemble then protect for best result. I had a similar situation with my Jackaroo recently. Diode pack died & no part was av...
- Thu May 09, 2013 8:23 pm
- Forum: Suzuki MightyBoy
- Topic: Loud tapping after replacing Head Gasket
- Replies: 8
- Views: 1547
Re: Loud tapping after replacing Head Gasket
I'd list the wife on ebay as well as the car/s. No woman will separate me from my interests... just trying would cost her.
- Thu Apr 25, 2013 11:05 pm
- Forum: Wanted to Buy
- Topic: Towbar kit
- Replies: 11
- Views: 1582
Re: Towbar kit
Won't be easy to find my towbar pics - they were in the tamon.org gallery...just not sure where I put my copies. I do need to take my tow bar off to fix some rust in the rear beaver panel so more pics will be taken eventually.
- Sat Apr 20, 2013 1:24 pm
- Forum: Suzuki Alto / Hatch
- Topic: 800cc auto gearing vs 800cc manual gearing
- Replies: 6
- Views: 2715
Re: 800cc auto gearing vs 800cc manual gearing
The 800 auto will sit on 110 for ages but happier to sit on 100. Fuel consumption good at 90 - 95 but starts dropping as you go faster (sitting 2 -3 seconds back behind a large bodied truck helps heaps, no need to get right up on the tailgate). My 800 auto was fairly thirsty, I put that down to livi...
- Sat Apr 20, 2013 1:05 pm
- Forum: Wanted to Buy
- Topic: Towbar kit
- Replies: 11
- Views: 1582
Re: Towbar kit
Aside from second hand, you won't find a towbar made for a MightyBoy as they were not rated for towing. The Hatch on the other hand was rated & some companies still have ability to supply. I have an Aranda Towbars Suzuki Hatch unit on my MB that was acquired second hand. I had very little diffic...
- Tue Apr 16, 2013 11:12 pm
- Forum: Suzuki MightyBoy
- Topic: G10 Engine Swap Compendium (What you may get yourself into)
- Replies: 17
- Views: 9622
Re: G10 Engine Swap Compendium (What you may get yourself in
Do the different G10 engines have interchangeable parts? Head for example. Mine is going back together with a tin top (early) G10a with a worked head, cam (unknown) & Hitachi carb(possibly from Datto 1600 or Pulsar) driving through a 5 speed from a series 2 or 3 Swift. An alloy block would light...
- Sun Apr 14, 2013 10:54 pm
- Forum: Suzuki build showcase
- Topic: arklan f8c engine swap
- Replies: 162
- Views: 20901
Re: arklan f8c engine swap
Check the wheel cylinders for leaks. If all good, check the master cylinder. Master does not necessarily have to leak externally for the said symptoms to exist, could be as simple as pitting in the bore &/or worn buckets/seals. Wheel cyls should still be avail. as a new item at the local parts s...
- Mon Apr 08, 2013 3:23 pm
- Forum: Wanted to Buy
- Topic: I Need to buy an engine
- Replies: 6
- Views: 1070
- Mon Apr 08, 2013 3:20 pm
- Forum: Suzuki MightyBoy
- Topic: F5A block to replace F8B
- Replies: 15
- Views: 1662
Re: F5A block to replace F8B
Run a search on 'matiz' or 'F8C' & you will find the answer - one of the members has done an F8C transplant. There is also info in http://www.teammightyboy.com/workshop/3 ... onversions. I have also seen a post on new parts available from an ATV supplier in the last week.
- Sun Apr 07, 2013 11:24 pm
- Forum: Suzuki MightyBoy
- Topic: F5A block to replace F8B
- Replies: 15
- Views: 1662
Re: F5A block to replace F8B
The blocks differ in bore (of course). Past posts have indicated that although very similar, there is limited crossover compatibility. The forums search function should bring up at least some of those past posts.
- Sat Apr 06, 2013 5:45 pm
- Forum: Suzuki MightyBoy
- Topic: oil leaks
- Replies: 6
- Views: 1782
Re: oil leaks
I cured my rocker cover leak by buying a molded (polyurethane I think) gasket & using silicone to glue it to the cover - just don't over do the silicone & let it cure before tightening the bolts. I taped mine in place & sat it gasket down on a sheet of newspaper. Cork gaskets don't like ...
- Sun Mar 24, 2013 9:27 pm
- Forum: Suzuki Alto / Hatch
- Topic: Engine starts on one piston then slowly the others fire
- Replies: 7
- Views: 1622
Re: Engine starts on one piston then slowly the others fire
Iridium plugs last longer - unless you have some sort of really high output ignition, the iridiums you have should go for years & just need an occasional clean up. They were designed for the more modern engines with insane ignition output figures that melt/burn ordinary plugs out fairly quickly ...
- Sun Mar 24, 2013 9:16 pm
- Forum: Suzuki MightyBoy
- Topic: Weber 32ADF Carby Install
- Replies: 5
- Views: 1485
Re: Weber 32ADF Carby Install
I would think it could be used on an auto but tuning may be slightly different & there is something in my memory saying vacuum lines might be different but there will be a way around that.
- Sun Mar 24, 2013 9:12 pm
- Forum: Suzuki Alto / Hatch
- Topic: loosing coolant - f8b
- Replies: 7
- Views: 1735
Re: loosing coolant - f8b
Absolutely not - you will be back to him with another problem soon after removing it. Part of the thermostats job is to slow the flow of coolant so it has a chance to be cooled as it passes through the radiator. Remove the thermostat completely & the coolant speed increases thus reducing the rad...