WTB: FRONT MOUNT INTERCOOLER
The core is 90mm think
Tranny oil coolers are fine for liquid, but they can't handle large volumes of air.
xrs, sorry mate, 90mm core is about 40mm thicker than I can use.
xrs, sorry mate, 90mm core is about 40mm thicker than I can use.
F8B EFI turbo - Three pots and a snail.
The tranny oil cooler cores are usually only a single length of 10mm pipe bent at 180° all over the place in my experience... Far too restrictive for large volumes of high-pressure air.
[url=http://www.tamon.org/?page=owners&id=10][img]http://www.tamon.org/forum/images/ute_specs.gif[/img][/url]
-
- Posts: 33
- Joined: Mon Sep 12, 2005 5:36 pm
- Location: B Hill but relocating
do yas reckon a stock JSPEC cooler of a galant Vr4 will fit?
sorry unsure of dimensions just wondering if any one knows from experience?
sorry unsure of dimensions just wondering if any one knows from experience?
none for ya
[url=http://www.tamon.org/?page=owners&id=10][img]http://www.tamon.org/forum/images/ute_specs.gif[/img][/url]
- Goofy[HSK]
- Posts: 630
- Joined: Tue Nov 15, 2005 9:33 pm
- Location: South Australia
- Contact:
JDM vr4 = 420x205x65mm (WxHxD) (core size)chomp on this wrote:do yas reckon a stock JSPEC cooler of a galant Vr4 will fit?
sorry unsure of dimensions just wondering if any one knows from experience?
maybe your thinking of the a-spec one? which is quite small
'89 Alto Works RS/R - Awaiting: Paint, Windscreen, Compliance, Lottery
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
-
- Posts: 33
- Joined: Mon Sep 12, 2005 5:36 pm
- Location: B Hill but relocating
will them dimensions fit in mb good???.. i know that the a spec ones are tiny compared to j spec coolersJDM vr4 = 420x205x65mm (WxHxD) (core size)
maybe your thinking of the a-spec one? which is quite small
none for ya
It will fit as a top mount above the gearbox, but as a front mount you've got buckleys.
Hell I'm having trouble trying to mount a cooler that is about 250x150x50mm on my ute, and it has a full size front bar on it.
Hell I'm having trouble trying to mount a cooler that is about 250x150x50mm on my ute, and it has a full size front bar on it.
F8B EFI turbo - Three pots and a snail.