WTB: Rear electrical pulgs to suit Alto Works Dials
I'v got my mighty boy cluster out atm, with the spare hatch plugs pluged in. Can i just stick like the yellow wire on the + side of a car battery and the black wire to the - and see if a light shows up on the dash? Or is there another way to do it?
Okey, so far on the mighty boy cluster i have found this
Orange with yellow tracer is temp
Yellow with black tracer is fuel
Green with yellow tracer is right turn signal
Black with white tracer is left turn signal
Red is the Brake
Orange is the Park Brake
Thats all i'v got at the moment, cant seem to find the oil one or high beam.
Orange with yellow tracer is temp
Yellow with black tracer is fuel
Green with yellow tracer is right turn signal
Black with white tracer is left turn signal
Red is the Brake
Orange is the Park Brake
Thats all i'v got at the moment, cant seem to find the oil one or high beam.
R - high beam light
W - 12V
R/Y - backlight
B/W - left turn light
W/R - brake fluid warning light
R/B - brake fluid warning light
Y/R - fuel gauge
Y/W - water temp gauge
Y/B - oil pressure warning light
G/Y - right turn light
B - earth
Bl/B - handbrake light
W - 12V
R/Y - backlight
B/W - left turn light
W/R - brake fluid warning light
R/B - brake fluid warning light
Y/R - fuel gauge
Y/W - water temp gauge
Y/B - oil pressure warning light
G/Y - right turn light
B - earth
Bl/B - handbrake light
F8B EFI turbo - Three pots and a snail.
The Hatch colours/plug positions are different, but the actual functions of the wires remains the same. When I installed the Hatch cluster in my MB I just swapped the cluster loom where it plugs into the main harness and everything worked fine.
F8B EFI turbo - Three pots and a snail.
http://www.tamon.org/gallery/v/members/ ... 9.JPG.html
Alto cluster sort of fits the mighty boy dash, missing the plastic screen.
Good news is everything works on the cluster. Just need to make it look good then wire it to the mighty boy and see if she goes
Alto cluster sort of fits the mighty boy dash, missing the plastic screen.
Good news is everything works on the cluster. Just need to make it look good then wire it to the mighty boy and see if she goes