http://www.ae86drivingclub.com.au/forum ... )?p=819564
really want to know if these will fit my Altoworks RSR 1987 CV71
will these wheels fit my Alto RSR CV7
Sorry dude, not a snowflake's chance. They're about an inch too wide, and the offset is RWD (almost 2" in the wrong direction).
You need something more like 13x5.5" with a +40 offset.
You need something more like 13x5.5" with a +40 offset.
F8B EFI turbo - Three pots and a snail.
-
- Posts: 58
- Joined: Tue Jul 26, 2011 5:35 pm
dam really want to get some dishy superlights , would the spec your saying still give that sort of dish? (i have no idea how it works/which number will increase the dish tell you the truth)
-
- Posts: 58
- Joined: Tue Jul 26, 2011 5:35 pm
http://drummingrabbitgonecrazee.blogspo ... -rs-x.html
see what you mean..
i wonder how far those superlights would stick out if i am using stock suspension?
i guess i could flare the gards out by a 2.5cm, it may cover it lol
see what you mean..
i wonder how far those superlights would stick out if i am using stock suspension?
i guess i could flare the gards out by a 2.5cm, it may cover it lol
Given the rim width and agressive offset those AE86 superlites would stick out at least 2 inches.
F8B EFI turbo - Three pots and a snail.
-
- Posts: 58
- Joined: Tue Jul 26, 2011 5:35 pm
http://www.rs-watanabe.co.jp/index2.htm
Watanabe/SSR RS-8 14x6 +13, 4x114.3
would these fit , or how much would it stick out?
cheers
Watanabe/SSR RS-8 14x6 +13, 4x114.3
would these fit , or how much would it stick out?
cheers
Well they'd stick out 30mm further than a standard wheel.
If you want to check these things for yourself use the handy wheel calculator:
http://www.tamon.org/wheel_calc/wheel_calc.html
Input the specs and it will show you the expected change.
If you want to check these things for yourself use the handy wheel calculator:
http://www.tamon.org/wheel_calc/wheel_calc.html
Input the specs and it will show you the expected change.
F8B EFI turbo - Three pots and a snail.
-
- Posts: 58
- Joined: Tue Jul 26, 2011 5:35 pm
thats would be sweet mate thanks.
i guess ill have to work out how much you can flare the guards on the altoworks, otherwise it seems deepdish wheels will never fit?
i guess ill have to work out how much you can flare the guards on the altoworks, otherwise it seems deepdish wheels will never fit?
You're dealing with a car that has FWD offset wheels, so if you want dish you have two options - flare the arches and use RWD offset wheels, or find FWD offset wheels that have spokes that curve inwards to give the effect of dish.
Best example of this is Volk TE37 Cup (They have to be the 'Cup' model though)
Best example of this is Volk TE37 Cup (They have to be the 'Cup' model though)
F8B EFI turbo - Three pots and a snail.
Here are some photos of how far my Wantanabes stick out.
The front flair is approx 55mm deep, so depending on how phat the tyres will be, I might need to flair the guard a bit more to make them fit. The rear should be fine.
So, +13's will be way to wide. Could be an interesting look though.
The front flair is approx 55mm deep, so depending on how phat the tyres will be, I might need to flair the guard a bit more to make them fit. The rear should be fine.
So, +13's will be way to wide. Could be an interesting look though.
- Attachments
Yes it's my ute, no I won't help you move
-
- Posts: 58
- Joined: Tue Jul 26, 2011 5:35 pm
http://www.otomoto.com.au/p/5238938/momo-17x75-.html will these fit lol
- Goofy[HSK]
- Posts: 630
- Joined: Tue Nov 15, 2005 9:33 pm
- Location: South Australia
- Contact:
< 13x7 or 14x7 imo
'89 Alto Works RS/R - Awaiting: Paint, Windscreen, Compliance, Lottery
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com