Team MightyBoy

Posted: **Mon Jan 20, 2014 7:30 pm**

will a set of 13x5.5 with 175/65 tyres fit up nicely w/o scrubbing ?? i looked at the wheel/tyre chart and the combo wasnt there.

cheers.

Posted: **Mon Jan 20, 2014 9:49 pm**

Really depends on the offset of the wheels. The tyre width means you'll need to roll your arches.

Posted: **Tue Jan 21, 2014 10:34 am**

ok so I can get 165/65R13 from my local bob jane for around 110 each, meant to be 4mm larger than standard all up. Hopefully this works out well

Posted: **Tue Jan 21, 2014 9:14 pm**

Assuming the offset is right then 165/65 will fit, but they're a fair bit more than 4mm larger than the original 145/70/R12.

Posted: **Wed Jan 22, 2014 9:14 am**

hmmm it seems the guy a bob janes doesn't know his stuff that well then

Posted: **Wed Jan 22, 2014 3:19 pm**

No, they generally dont. The diameter difference is about 25mm.
Did they advise that you need special wheel nuts?

Posted: **Thu Jan 23, 2014 9:12 am**

i assume the ones i have atm will be fine, i have a set of 14s otherwise i can track some down if i need different ones

Posted: **Fri Feb 28, 2014 9:26 am**

Well 165/65 works on a set of 13" hotwires with no scrubbing

Posted: **Sat Jun 14, 2014 1:27 pm**

Looking at puting 14inch rims on my mighty boy, what other var rims fit best , don't want mags just stock 14 inch rims

Posted: **Sat Jun 14, 2014 2:34 pm**

Swift GTi wheels are your best bet. You will need special wheel nuts as the stud holes are 12mm, but the MB only has 10mm studs.

WHEELS