Page 1 of 1

Indicator Pins?

Posted: Sun Jun 12, 2011 7:42 pm
by Billie
Hey would anyone be able to tell me which way the indicator cancel pins sit on the steering wheel when its facing dead straight?

Cheers

Re: Indicator Pins?

Posted: Sun Jun 12, 2011 8:53 pm
by gadj
Can't be accurate off the top of my head except that they protrude from the wheel just enough to interfere with the switch in order to cancel the indicator but not so much that they hinder the wheels turning.
I'll PM my mobile so you can remind me to look at mine tomorrow.

Re: Indicator Pins?

Posted: Sun Jun 12, 2011 9:07 pm
by Billie
Only wondering because i have a boss kit on there and I have to turn the wheel abit to turn the right indicator on. I assume the pins sit like : that

Re: Indicator Pins?

Posted: Sun Jun 12, 2011 10:05 pm
by Brayden
Pins sit at 12 and 6. I have had the same indicator issue with every boss kit I've tried. Never bothered to look for a solution though.

Re: Indicator Pins?

Posted: Sun Jun 12, 2011 10:17 pm
by Billie
Cheers Brayden.

Re: Indicator Pins?

Posted: Tue Jun 14, 2011 10:13 am
by ZUTUTU
My boss kit makes the right indicator not want to turn on at first then sometimes not turn off.

left indicator is fine however

Re: Indicator Pins?

Posted: Tue Jun 14, 2011 6:45 pm
by Billie
Mine is the right indicator too haha.

Re: Indicator Pins?

Posted: Tue Jun 14, 2011 6:48 pm
by shavenyak
My boss kit didn't come with pins!

So I made some by cutting the heads off some small screws:
DSCF0450Medium.jpg
It seemed to do the trick, and the indicators work like factory.

Re: Indicator Pins?

Posted: Tue Jun 14, 2011 7:53 pm
by Billie
Lol cool. Should try that with one of the 4 boss kits I have.

Cheers.

Re: Indicator Pins?

Posted: Tue Jun 14, 2011 9:18 pm
by gadj
I wasn't certain but knew it was either 6 & 12 or 9:30 & 2:30. 2.5mm roll pins work really well too, just drill the right size hole & tap them in.