suspension
Yeah I have one ... don't waste your time looking. I'd been looking for something since I got my alto 5 years ago and I havn't turned up any thing worth while. I'm considering designing something for my final year project for uni. but, that's another 2 years off and what I was gonna do was rediculus and barely worth mentioning.
-
Goofy[HSK]
- Posts: 630
- Joined: Tue Nov 15, 2005 9:33 pm
- Location: South Australia
- Contact:
for what car??
'89 Alto Works RS/R - Awaiting: Paint, Windscreen, Compliance, Lottery
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
-
stevan_istheman
- Posts: 851
- Joined: Tue Nov 02, 2004 10:13 am
- Location: Sunshine Coast, Queensland
- Contact:
Ummm.......
This post is in the alto/hatch/cervo section...
This post is in the alto/hatch/cervo section...
BAL4 Designs
For all your mechanical design and drafting requirements.
For all your mechanical design and drafting requirements.
-
Goofy[HSK]
- Posts: 630
- Joined: Tue Nov 15, 2005 9:33 pm
- Location: South Australia
- Contact:
oh, so i guess it must be a 89 alto works rs/r then
full sets can be purchase from yahoo auctions japan ( http://auctions.yahoo.co.jp )
or directly from suzuki sport ( http://www.suzukisport.com )
you're probably looking around 200000yen + shipping
if its a 800 hatch (SS30, SS40?), then you're out of luck
full sets can be purchase from yahoo auctions japan ( http://auctions.yahoo.co.jp )
or directly from suzuki sport ( http://www.suzukisport.com )
you're probably looking around 200000yen + shipping
if its a 800 hatch (SS30, SS40?), then you're out of luck
'89 Alto Works RS/R - Awaiting: Paint, Windscreen, Compliance, Lottery
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
'89 Alto Works RS/R - Complied, Registrable, Awaiting Paint, Engine not running
www.hillsidekonnection.com
unless the hatch uses the same strut and brake assembly as the mighty boy, in which case you'd be set because mighty boy units are available from hotbits. refer to this post
http://klass.tamon.org/viewtopic.php?t=1029
http://klass.tamon.org/viewtopic.php?t=1029
lol, I was talking about my Suzuki Alto GA. and when I said "Yeah I have one" I ment suggestion. I have a set of '93 Alto works struts (they where too short for my car but, to my knowledge they are standard).
I've mainly been looking at getting a set of inserts but, I havn't been able to find an Australian supplier that can get the right diameter with a short enough strut (everything else was identical).
If you can read Japanese, can get someone there to freight some shocks and have faith that your buying a good enough product. Then by all means go ahead. Me personally I'm thinking of redesigning my Alto to be a whole 'nother beast (for my major project at uni) I'm also prepared for it to not be street legal afterwards. I just need money.
I've mainly been looking at getting a set of inserts but, I havn't been able to find an Australian supplier that can get the right diameter with a short enough strut (everything else was identical).
If you can read Japanese, can get someone there to freight some shocks and have faith that your buying a good enough product. Then by all means go ahead. Me personally I'm thinking of redesigning my Alto to be a whole 'nother beast (for my major project at uni) I'm also prepared for it to not be street legal afterwards. I just need money.
Fyn, I'll have a look at my Alto and advise you on what your options are. 
F8B EFI turbo - Three pots and a snail.